Replacement Glass for Raider Truck Caps
Our replacement glass panels are manufactured to the exact specifications as the original glass installed on your Raider truck cap. Every piece is tempered automotive-grade glass that meets the same safety and clarity standards we use in new cap production.
We stock glass for every Raider cap model currently in production and maintain inventory for discontinued models dating back fifteen years. Each panel ships with new rubber seals and installation clips to ensure a weather-tight fit. Whether you need a single side window, rear slider, or full glass set, we manufacture every piece in-house to guarantee proper fitment.
- Tempered automotive-grade glass meeting DOT safety standards
- Factory specifications matching original Raider cap installation
- Includes new rubber seals and mounting clips with each panel
- Available for current models and discontinued caps back to 2010
- Dark tint and clear glass options for most window positions
Glass Types & Tint Options
We manufacture replacement glass in clear and dark tint variants for most window positions. Side windows are available in both finishes, while rear slider panels typically come in dark tint to match factory installations. The dark tint provides privacy for bed cargo and reduces heat buildup inside the cap during summer months.
All glass is tempered through our controlled heating and rapid cooling process, making it four to five times stronger than standard annealed glass. If a panel does break under extreme impact, tempered glass shatters into small granular chunks rather than sharp shards, reducing injury risk. Clear glass panels maintain the same tempering process while offering full visibility for work caps where interior lighting is essential.
Measuring & Ordering the Correct Panel
To order the correct replacement glass, you’ll need your Raider cap model number and the specific window position. The model number is stamped on a metal plate inside the cap, usually near the front bulkhead. Window positions are designated as driver side, passenger side, driver rear quarter, passenger rear quarter, or rear slider.
If you can’t locate your model number, measure the glass opening from inside the rubber seal—height first, then width. Our customer service team can match dimensions to the correct panel. For custom or modified caps, send us the measurements and we’ll cut glass to your exact specifications.
Installation & Seal Replacement
Each glass panel ships with a new rubber seal designed for the specific window position. The seal has a locking strip that holds the glass in place—no adhesive or sealant required for most installations. Start by removing the old seal completely and cleaning the cap frame with isopropyl alcohol to remove any residue.
Fit the new seal around the glass perimeter, working from one corner and pressing the channel firmly over the glass edge. Once the seal is fully seated on the glass, position the panel in the frame opening from the exterior. Use a plastic trim tool to tuck the seal’s outer lip into the frame channel, working your way around the perimeter. The locking strip inserts last, pushed into the seal’s center channel to compress the rubber and lock everything in place.
Browse other Raider cap replacement parts
What people are saying
Common questions about Raider replacement glass
Locate your cap’s model number on the metal plate inside the front bulkhead area. Contact us with the model number and window position (driver side, passenger side, rear slider, etc.) and we’ll confirm the correct glass panel. If you can’t find the model plate, measure your glass opening height and width from inside the rubber seal and send us those dimensions along with photos of your cap.
Yes, every glass panel includes a new rubber seal cut specifically for that window position, plus the locking strip and any mounting clips needed for installation. Rear slider orders include new track inserts and nylon rollers. You don’t need to purchase seals separately unless you’re replacing seals on glass that isn’t broken.
We maintain glass inventory for discontinued models going back to 2010. Provide your model number or glass measurements and we’ll confirm availability. For caps older than 2010, we can manufacture custom glass to your exact specifications if we no longer stock your specific model’s panels.
Clear glass transmits at least 70% of visible light and provides full visibility, making it ideal for work caps where you need to see bed contents clearly. Dark tint glass transmits 25-35% of light, offers privacy for cargo, and reduces interior heat buildup. Both types use the same tempering process and meet identical safety standards.
Stock glass panels ship within one business day and typically arrive in three to five days depending on your location. Custom-cut glass orders ship within five business days. All glass ships fully insured with tracking and requires an adult signature at delivery due to the fragile nature of the product.
Most customers install their own glass using basic hand tools. The compression seal system doesn’t require adhesives or special equipment—just a plastic trim tool to tuck the seal into the frame channel. We include detailed instructions with every order. Rear sliders require more steps due to the track system but are still manageable for DIY installation. Professional installation typically takes a shop 30-45 minutes per panel.
Replacement glass carries a two-year warranty against manufacturing defects including improper tempering, dimensional errors outside our 1/16″ tolerance, and seal material failure. The warranty does not cover damage from improper installation, normal wear and tear, or impact damage. File warranty claims through our customer service department with photos of the defect and your original order number.